You can set the points and signals by specifying parameters to this program. These are in the form of standard cgi queries, viz
http://ajh.co/~ajh/cgi-bin/jmr2.py&action&action&...where each action is as follows:
So, for example
http://ajh.co/~ajh/cgi-bin/jmr2.py&points&gp1=r&gs1=g&signalswill first show the current points settings, then set points gp1 to right, and signals gs1 to green, and finally display the current signals settings.
Note that conflicting movements are not allowed: you cannot alter any point unless the controlling signals are red, not can you set signals to green if that would conflict with any current points or signals settings.
The "route" and "signal" settings have yet to be implemented in version 2.4.
Actions performed: (None)
If you find any interlocking fault, please report to the author.
Track OccupancyThere are no cleared blocks to occupy
Track ClearingThere are no occupied blocks to clear